These are a new concept light modelled off the new Bronco in USA.

They are 5×7 (sometimes called 6x8, depending on where you measure from) and will fit anything our 5×7’s would normally fit.

The DRL Halo can come on with parkers or a manual on/off switch.  The flat bar of the DRL stops being white and flashes amber when indicating while the circle stays white. If you have the DRL turned off the the flat bar can still flash amber when indicating.

They still have the normal 3 pin H4 plug and same as all our other JTX 5×7’s let us know if you have a Toyota or negative switching and we can supply the JTX modules for an additional fee to make them work.

While these remain in concept stage there is no ADR cert with these. Technically you are buying them for show or off road use only. There is an up and a down and we send you a matching pair of left light and right light.

• The DRL Halo is really bright even in full sun light and it is solid and is not made up of a lot of small lights.
• The light output is amazing and in low beam there is a very distinct flat line of light
• In High Beam mode the low beam is also on – this is a setting within the light to ensure maximum brightness in high beam.
• They are indestructible and waterproof.

These are 5″x7″ rectangular headlights and they fit vehicles such as Toyota Hilux (1978-2005), Honda Preludes and wide variety of Ford F-Trucks. Theoretically, any vehicle with single rectangular lights (2 lights in total) should be compatible with these lights. Some late model F Trucks (2002 for example) Ford removed one locating tab on each light to make the lights not interchangeable from side to side. Small modifications may be needed to make them fit applications like that.

Specs:

• Headlight amp draw: 3A each.
• Halo amp draw: 0.35A each.