Bonnet rubber bumper kit with side bumpers and front height adjuster bumper rubbers for the vehicle.

To install the side rubbers to the bonnet size the hole in the rubber first using a piece of stiff fencing wire or a small screwdriver cut the end of level with no sharp edges, then lubricate the domed head and carefully push the head through the hole in the bonnet, with the round bonnet rubbers for the adjuster bolts, lubricate then push over the bolt head with a twisting motion. Adjust the height of the bonnet so its level with the guards.

This product suits Holden EJ, EH

• Standard, Special, Premier
• Sedan, Wagon, Utility (Ute), Panel Van
• Fitted with 6 cylinder Grey motor, Red motor 149, 179 Engine