Complete repair kit for window regulator - Front Door.
Contains a set of cables with connectors and clips (carrier/rail sliding clip) as shown on the picture. Our clips are solid plastic, not like the OE ones, or other replacement kits which will fail again.

Enough to fix the front window regulator.

FD models 10/2007 - 05/2012

  • 2007 - 2012 Hyundai i30
SKU 15394
Shipping Weight 0.1500kg
Shipping Width 0.010m
Shipping Height 0.010m
Shipping Length 0.010m
Shipping Cubic 0.001000000m3

Wire End Stops

By: on 11 February 2022
The kit is installed and functioning. I have repaired a few of these windows types. It was VERY difficult to twist the plastic drive cog as the overall wire lengths are needing 1mm additional length on each. The wire end stops are only slid loosely into the sides of the plastic window holders, this should be improved as the wire stop slips off very easily. Why don't you use the same end stops that are on, embedded in the plastic window slides for all wire cable ends? The wire was very tight and difficult to fit needs 3mm more length. Make these changes and it would star rate a 5
(4)

Write a product review