Rear Disc Brake Conversion Kit, 1963 - 1965 US Falcon V8, W/ Correct Style Cables, Modern Style Design, Complete, Kit

This is a complete rear disc brake conversion kit for 1963 - 1965 Falcons. These kits fit all original or original style Ford small bearing rear ends, 8 or 9 inch. All 1963-65 V8 Falcons had small bearing rear ends (8 or 9 inch). Rear disc brake kits add safety and performance to your classic Falcon. This kit is complete, easy to install, and will improve the stopping power in your Falcon.

The modern and effective brake shoe in rotor parking brake design is far superior to the typical "jack handle" on caliper type. Most of the kit's components are pre-assembled on the rigid cast backing plate, ready for installation.

These include turn-key model specific brake cables and braided SS (US Spec, may not be legal in Australia) brake caliper hoses and hardware to mount them to the axle tube.

This is a complete kit including calipers, rotors, brake cables, shoes, wheel bearings, seals, and hardware.

IMPORTANT NOTES:

• Requires 15 inch or larger wheels although SOME 14 inch wheels will fit (we cannot tell you if your specific wheel will work). As a general rule we recommend 15+ inch wheels.
• Requires 5 x 4.5 inch lug pattern.
• Recommened to use in conjunction with CSRP front power disc brake conversion kits.

FEATURES:

• Based off a Ford OE design (Ford Explorer, with proper design modifications for small bearing rear end)
• Modern functional Emergency/Parking brake via a set of brake shoes inside the inboard side of the rotor (as used in most modern cars).
• Turn key brake cables included (not offered by anyone else)
• Simple caliper mounting with NO shims.
• A single piece cast backing plate/caliper bracket
• Dust/splash shields
• No axle offset/same track width
• 11" plain rotors
• Single piston calipers
• New bearings and axle tube seals included
• Caliper hydraulic hose (braided SS) and axle mounting bracket provided (buyer must incorporate rear supply lines to these hoses)

SPECIFICATIONS:

• UOM: Kit
• Qty required per car: 1
• Position: Rear
• Rotors included: Yes
• Rotor size: 11 inch
• Rotor type: Plain
• Calipers included: Yes
• Caliper piston quantity: 1
• Parking brake cables included: Yes
• Parking brake cable type: Model specific (not universal)

VEHICLE FITMENT

• 1963 - 1965 V8 Falcon - requires 5 lug x 4.5 inch lug pattern with 15+ inch wheels