The new VariSpring line of springs was designed to complement the VariShock family. Once again we used higher technology to resolve application limitations. These springs are manufactured using a new high-tensile wire that is stronger than the chrome-silicon wire used by other manufacturers. This allows the springs to “set solid.” The springs can compress until the coils touch without damaging the springs or causing them to take a set, which ultimately changes the ride height. Since this wire can fl ex more than con ven tion al chrome-silicon wire, these springs have greater travel than our competitors’ springs of the same rate. These springs will allow your shocks to travel their full range of motion without going solid. This gives you greater traction and control at full bump and additional suspension travel to work with. If you are ready to take ad van tage of higher technology with greater travel and lighter, stronger springs, then step up to VariSprings. VariSprings have a silver-powder-coat fi nish. They are individually la beled with our part number and spring rate on the outside of the coils for easy ref er ence. VariSprings are available for front and rear ap pli ca tions in four lengths and a broad range of rates. All VariSprings are + 3% on rate. The steps be tween rates are suffi ciently close to make very fi ne ad just ments

• Available in four free lengths: 7”, 9”, 12”, and 14”)
• Made from a special high-tensile wire that allows the shock to reach the bump stop without going into coil bind
• Made in America
• All VariSprings are designed to compress to solid height without taking a set
• Powder-coated
• Ends are closed and ground ± 1.5 deg.
• ± 3% maximum variation on spring rate
• 2.5” inside diameter
• Part number and spring rate are silk-screened on the outside of the coil for easy identification